CL1300 Wi-Fi SoC
802.11 4x4 Implicit Beam Forming MIMO SoC for multiple HD streams over Wi-Fi
| Celeno’s innovative Wi-Fi System on a Chip (SoC) reflects a fresh technological approach to HD video streaming, optimizing Wi-Fi to achieve carrier-grade performance. Celeno’s technology introduces significant range, robustness and throughput improvements, for effective HD video streaming over standard Wi-Fi.
|
 |
|
Celeno’s solutions enable applications such as IPTV residential gateway to Set Top Box connectivity, multi-room DVR content distribution to multiple terminals around the house, and Internet and PC multimedia and entertainment content distribution.
|
Powered by its patent pending OptimizAIR™ transmit-side, client agnostic technology, Celeno’s silicon solutions offer significant benefits:
- Extreme range and coverage improvements, yielding an effective coverage for robust HD video streaming of 10,000 sq. feet in North America or 500 sq. meters in Europe - up to 10 times that of off-the-shelf 802.11n MIMO draft 2.0 solutions
- Throughput improvements with zero packet error rate - up to twice that of off-the-shelf 802.11n MIMO draft 2.0 solutions
- Optimized solution cost structure and future proof architecture – ground breaking performance independent of the client’s Wi-Fi chipset and antenna design (even with
single stream, single antenna clients)
- Multiple reference designs for various product configurations and flexible deployment options including a complete reference design for a high performance Wireless Video Extender
CL1300 SoC Highlights
- 4Tx4R Implicit (client agnostic) Beam forming MIMO to improve signal strength at the receiver client by 400%
- Supports up to 4 HD video streams with guaranteed QoS
- Includes a 802.11 digital baseband integrated with Wireless Network Processor and embedded CPU processing engines for overall reduced Bill of Materials and zero MIPS load on host processor
- MII interface eliminates the need for software drivers integration at the external host processor
CL1300 Solution Features
- Implicit (client agnostic) 4Tx4R transmit Beam Forming MIMO for up to 12dB gain
- TDM-like Scheduled MAC for guaranteed QoS without collisions
- Real-time channel aware adaptive rate eliminates retransmission and packet loss
- Point to Multipoint solution architecture supporting up to 4 different concurrent
HD streams
- Superior interference immunity:
- Best spectral efficiency using only 20MHz bandwidth
- Advanced PHY-level interference detection and automatic channel scanning and hopping
- Advanced regulatory requirements support including Dynamic Frequency Selection (DFS)
- IGMP snooping, Multicast to Unicast translation and WDS support for seamless IPTV network integration
- WPS – Wi-Fi Protected Setup for simple setup and security configuration
- HTTP-based GUI management and software upgrades
- Remote management based on SNMP or TR-069 standards
- Full wire speed of 100Mbps Ethernet-Wi-Fi bridging with full classification and QoS
based on internal hardware network processor with no MIPS load on host processor
- Fast power-up time of less than 20 seconds until video connectivity
- MII/RMII interface operates as an equivalent Ethernet PHY device for simple integration
with host processor
- Full-rate hardware-based encryption engines to support WEP, AES-CCMP / Wi-Fi-WPA2
- Internal printed antennas deliver high spatial diversity and beam forming gain
Technical Specifications
|
CL1300 - Technical Specifications
|
|
Frequency Band
|
4.900–5.950GHz
|
|
Supported clients device network standards
|
802.11a/n
|
|
Security
|
WEP, AES(CCMP)
|
|
Host Interface
|
MII
|
|
Peripheral Interface
|
UART, GPIOs, I2C, SPI
|
|
Memory Interface
|
DDR2, Serial Flash
|
Request full product documentation